AZ55 galvalume steel coil is coated with 55% aluminum zinc alloy by hot dip plating process. It has excellent corrosion resistance and can be used in various applications, such as the automotive industry, shipbuilding industry, construction industry, etc. In addition to being an excellent outdoor material, AZ55 galvalume steel coil also has many other advantages. For example, it can be used for electrical equipment manufacturing or decoration, such as fences. In addition to these uses, this steel can also be used in various industrial applications because of its good mechanical properties and corrosion resistance.
Scope of Application
Construction industry: such as roof, internal and external wall panels, sound insulation walls, pipes, garages, etc.
Automotive industry: such as mufflers, exhaust pipes, wiper accessories, fuel tanks, truck containers, etc.
Household appliances: such as refrigerator backplane, air conditioner, microwave oven, LED backlight, electric cabinet, etc
Agricultural use: such as greenhouse, granary, pig farm, chicken coop, etc
Other industries: such as heat exchangers, dryers, etc.
Product Parameters
Product Name | AZ55 Galvalume Steel Coil |
Thickness | 0.12mm-6.00mm |
Width | 600mm-1500mm |
Length | 1m-12m, Support Customization |
Standard | AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc. |
Thickness of Aluminum Zinc Coating | 30-185g/m² |
Content of Al-Zn Coating | Al: 55%, Zn: 43.5%, Si: 1.5% |
Chemical Composition
Al | Zn | Si | Fe | Cu | Cd | Pb | Sn | Ni | Close Cr |
55-58 | 41-43 | 1.5-2 | 0.25 | 0.03 | 0.05 | 0.01 | 0.05 | 0.05 | 0.05 |
Mechanical Properties
Grade | Yield Strength MPa≥ | Tensile Strength MPa≥ | Elongation A%≥ |
DX51D Z/ZM/AZ/AM | 240-380 | 270-500 | 22 |
DX52D Z/ZM/AZ/AM | 140-300 | 270-420 | 26 |
DX53D Z/ZM/AZ/AM | 140-260 | 270-380 | 30 |
DX54D Z/ZM/AZ/AM | 120-220 | 260-350 | 36 |
S220GD Z/ZM/AM | 220 | 300 | 20 |
S250GD Z/ZM/AZ/AM | 250 | 330 | 19 |
S280GD Z/ZM/AM | 280 | 360 | 18 |
S300GD A/AM | 300 | 380 | 18 |
S320GD Z/ZM/AM | 320 | 390 | 17 |
S350GD Z/ZM/AZ/AM | 350 | 420 | 16 |
S450GD A/AM | 450 | 480 | 15 |
S550GD Z/ZM/AZ/AM | 550 | 550 | - |
Galvanized Surface Selection
Zero Spangle | Minimized Spangle | Normal Spangle | Large Spangle |
|
|
|
|
Type of Coating | Recommended Coating Weight |
Aluminum-zinc Alloy | 30/40/50/60/75/90/100/150 |
A: Coating quality50g/㎡,approximately equal to the coating thickness13.3pm | |
Project | Classification | Symbol |
Type of Coating | Aluminum-zinc Alloy | AZ |
Surface Finish | Conventional Sequins | R |
Minimize Sequins | M | |
Skin Through | S | |
Surface Treatment | Chromate Passivation | c |
Non-chromate Passivation | C5 | |
Chromate Passivationoiling | CO | |
Chromium-free Passivationoiling | CO5 | |
Anti-fingerprint | N | |
Chromate-free/Anti-fingerprint | N5 | |
No chromate high weather resistance fingerprint | NW | |
Oil filling | 0 | |
No treatment | U |
Material Comparison
Chinese Standard | European Standards | American Standard | Japanese Standard |
DC51D+AZ | DX51D+AZ | CS Type B, Type C | SGLCC |
DC52D+AZ | DX52D+AZ | DS | SGLCD |
S250GD+AZ | S250GD+AZ | 255 | - |
S300GD+AZ | - | - | - |
S350GD+AZ | S350GD+AZ | 345 | Class1 SGLC490 |
S550GD+AZ | S550GD+AZ | 550 | SGLC570 |
